Cable Eye Candy - Part II

I wanted to share a few more exciting cables for your viewing enjoyment :)

Below is a 4 pin XLR to RCA cable using a Switchcraft Triple A series XLR, Vampire RCA connectors, and Zynsonix Trebuchet Cable.

4 Pin XLR to RCA

This is a mini to RCA cable built for someone with exquisite tastes. It's a round braid of eight strands of Zynsonix Trebuchet wire with all ViaBlue accessories and connectors, including their smaller T6S mini connector (model 30539), their T6S RCAs (30506), and their Y-Splitter. Above the split features soft black nylon.

Eight Strand Mini to RCA

Here we have a four foot portable Trebuchet headphone cable for IEMs, these can be made for Noble, JH, 1964Ears, and previous model Westone IEMs. There is also a different plug for Shure, UE900, and the new Westone IEMs, Ultrasone Edition 5, Romeo, and Juliet, etc.

Westone 2 pin IEM cable

...and below is a very special speaker cable. This features a braid of Neotech UP-OCC 6Ns copper in Teflon which is then wrapped with multiple layers of teflon, then set in a PV tube sleeved with copper colored nylon multifilament. Above each split is a heavy machined brass Y-splitter, and each gold plated banana is terminated with Cardas silver and gold content solder. These speaker cables made the trek over to a client in South Africa. 

See something you'd like for yourself? Contact Zynsonix for a quick quote.

Pono Player Balanced Interconnect Cable

So you've taken the plunge on Neil Young's sweet little Pono player, however it uses a unique way to export those tunes to your balanced headphones or balanced rig. I'll be covering how I built an unbalanced cable, and how to build a balanced pair of cables so you can extract every juicy detail from those Hi Res tracks. As you may know, Zynsonix Audio offers these in any length or configuration, so reach out if you need one.

The Pono player features dual stereo 3.5mm outputs. You can use these to output to a pair of balanced headphones, a balanced rig that uses 3 pin XLRs (or mini XLRs / TRS plugs), or a single ended rig that takes good-old-fashioned RCAs.

Neil Young's Pono Player

Stereo 3.5mm connectors have three connections, the sleeve, the ring and the tip. When used in typical applications, the sleeve is a shared ground, the ring is the right signal, and the tip is the left signal. However not the case with the Pono in balanced mode.

Tip, Ring and Sleeve on a 3.5mm mini connector

In the case of the Pono player in balanced mode, each of the two 3.5mm goes to an individual three pin XLR. The Sleeve, as you'll note below, connects to the Pin 1 (ground). The Ring connects to Pin 3 (negative). The Tip connects to Pin 2 (positive). For a balanced headphone cable, you will note that the Sleeve connection is not used, only the tip (positive) and the ring (negative). These schematics are straight from the engineers over at Ayre Acoustics. If I'm not mistaken, this is going to be the portable standard for balanced connections including on upcoming models from Sony.

Pono Player wiring pinout / diagram

I made a handy dandy visual for the back of an XLR connector (note mini XLRs are different!) so you can see the pin assignments.

XLR pinout for reference

Below you'll see the pair of 3.5mm stereo mini to XLR cables using the great sounding Zynsonix Trebuchet 99.99997% pure ohno cast copper. The Viablue XLRs are very sleek looking, well made and use set screws rather than a traditional boot or crimp sleeve. The Amphenol mini connectors are my new favorite value connector, they offer a great connection and a recessed area near the barrel that allow them to be used with phone cases and portable DAPs with cramped faceplates.   

Pono balanced interconnect cable

All done and we have a pretty pair of Trebuchet interconnects for your Pono player. Off they go to a happy customer.

I hope you enjoyed this post on building a pair of interconnects for a Pono Player. Please reach out to Zynsonix Audio if you'd like your own custom Pono interconnects (balanced or single ended) or headphone cable, and keep enjoying those high res tracks!

The Fine Print:

The above steps detailing the build of a Pono player cable are for entertainment purposes only, and not intended to be used as assembly instructions. The owner of this blog and all associated parties can not / will not be held responsible if you attempt the process posted and cause physical harm to yourself, your surroundings or your property. 

Sennheiser HD800 Trebuchet Headphone Cable

Your life may change when you pull the trigger on a pair of headphones north of a grand. Your friends may decide that you've lost it, your significant other may give you a serious talk about family budgeting (or decide that the time is ripe to get that Louis Vuitton bag she's been wanting), and your daily consumption of ramen noodles will undoubtedly increase, but you'll quickly discover that there is some really impressive sound to be had in this neck of the woods.

The Sennheiser HD800 hit the streets in 2009 with a fancy 56mm high definition ring transducer that's said to produce a transmission range of 6-52,000 Hz, so even your dog would appreciate them. Lame jokes aside, the HD800 are incredibly crisp, clear and resolving and have earned many fans in the past 6 years.

Sennheiser HD800

What used to be uncommon, however now is more commonplace, is that headphones are more often coming with removable cables. While that is no-doubt a great thing (especially for owners of pets and office chairs), nearly every one of them is proprietary (much like how no one can settle on a portable balanced connector). The HD800 has its very own connector that even the HD700 doesn't share.

So, we've seen some various DIY HD800 connectors out there, there seems to be small barrel and larger barrel versions for thicker cable. Furutech recently hit the market with some fancier ones, namely the rhodium plated FT-800(R) or the CT-800(R) if you're a fan of carbon fiber. Both look quite a bit sleeker than the other variants out there, at least in my humble opinion. The connectors run roughly $50 for the generics and $98-$122 for the Furutech, not cheap at all, but I'd imagine the production run on these is fairly limited. I will also say that the Furutech is more pleasant to work with. You can snag the connectors from Soniccraft, among other purveyors of boutique audio goods.

Furutech FT-800(R)

FT-800(R) Internals

Soldering the HD 800 connectors requires a steady hand, a well lit soldering station and perhaps a magnifying glass. I'm convinced manufacturers are making these things more cumbersome to spite us all ;) Once I finish with each of these connectors, I fantasize about what a great surgeon I would be, truly world class! I digress. I do recommend isolating one of the solder joints with heat shrink as the terminations are oh-so-close, and you wouldn't want a short.

A bit of heatshrink is built up so the set screw has something to hold onto.

Microscopic pins

The Furutech connector then gets slipped in place, the back portion screwed on, and the set screw tightened down. Adhesive heatshrink is used to secure the connector and provide strain relief.

Heatshrink as strain relief

This particular cable is going to be made from Zynsonix Trebuchet cable, featuring super flexible ultra pure ohno continous cast copper in a sleek looking clear dielectric, and will be terminated with a balanced 4 pin XLR connector from Switchcraft. These new AAA-series XLRs from Switchcraft are really well made, with a very solid weight and feel, and they are only two pieces, which eases the build process. If you removed the logo and told me it was made by Furutech, I wouldn't bat an eye. Great connectors.

As you can see below, this cable features a hand braided litz of the slick looking Trebuchet ultra pure ohno continuous cast copper.

Trebuchet wire braid

Switchcraft AAA Series XLRs

Remember that 4 Pin balanced connector pins are typically:
1: L+
2: L-
3: R+
4: R-

And wrapping up, the final product:

Zynsonix Trebuchet HD800 Cable

I hope you enjoyed reading this DIYAudioBlog entry, please be sure to contact Zynsonix if you'd like a Trebuchet HD800 cable just like the above, or any other audio cable you happen to need. Until next time.

The Fine Print:

The above steps detailing the build of a headphone cable are for entertainment purposes only, and not intended to be used as assembly instructions. The owner of this blog and all associated parties can not / will not be held responsible if you attempt the process posted and cause physical harm to yourself, your surroundings or your property. 

Steampunk Grado with Turbulent X Drivers

I've heard plenty of good things about the Turbulent X drivers made to fit Grado Labs and Alessandro headphones, so I thought it would be fun to build a new pair. Anyone who's modded a pair of Grados and ran a few Google searches knows that there are hundreds of options out there, from Sennheiser pads to aftermarket leather headbands, to wood cups from numerous manufactures large and small. So if you don't want your Grado to look like everyone else's Grado, there's nothing stopping you from some serious customization.

I'm no stranger to modding Grados, my last being an Alessandro with custom wood cups and a cable made from Cardas copper. This time I decided to do something that I'm pretty sure no one else has tried, a Grado with copper leafed mahogany cups. Copper leafing is process where you put down a base coat of paint, sand, then put down adhesive sizing, then lay extremely thin sheets of copper down and burnish them onto the wood, then cover with some protective sealant. You'll see some other examples of this in my custom built tube amplifier bases.

I began with a pair of mahogany wood cups and performed the copper leafing process. You'll note that the look is not perfect, it has a unique weathered look that make it nice for a steampunk-esq look. It actually weathers over time a bit as well, which only makes it look better in my humble opinion.

Copper leafed Grado cups

Inside the cups, I'd be using some unique grating I had powdercoated a copper color. This was cut for a tight fit and affixed with adhesive.

Powdercoated grates

Since Zynsonix is known for it's audiophile quality wire, I wouldn't be using any run of the mill cable, but some really impressive wire that was custom-made for Zynsonix, particularly for headphone and portable cable applications.

Custom Zynsonix Trebuchet wire

This is a special 24 gauge wire with high flexibility and low memory properties called the Trebuchet. It uses a high-flex clear PE dielectric and ultra pure ohno continuous cast copper for the finest sound quality. 

The mini connector is the well-made Amphenol 3.5mm. Unlike many other mini connectors, it works well with portable DAPs and iPhones in thick cases. This was braided into a litz, then into two twisted pairs, one for each cup. 

Each wire was run into the cup, soldered directly to the Turbulent X driver, then test fit to verify where the wire would fall. The wire was then secured with a zip tie and some hot glue. If it's good enough for Grado, it's good enough for me ;) It is nice to use hot glue as it is removable later for future mods. 

Turbulent X Drivers - Green marks positive in this case

I needed a donor pair of Grados, this would be a pair of used SR-60s I located online.

Some of the best value cans out there, the SR-60

The headband was removed with a twist of the plastic, then the Turbulent Labs headband was installed. This is much comfier than the stock headband, although not the finest Grado headband I've used. That honor would go to JMoney. I do like the color on this one though. 

Next was the process of removing the stock SR-60 cups and installing the copper leafed cups. The forks on the stock unit needed to be dremeled down a bit for adequate clearance, but other than that, pretty straight-forward.  

Well now I have a very unique Grado build with some great sounding Turbulent X drivers and the superlative Zynsonix Trebuchet wire, a match made in heaven for my ears. The sound is crisp and detailed yet full-bodied and dynamic. 

Please feel free to contact Zynsonix if you'd like your headphone recabled with the Trebuchet wire, or if you'd like a custom cable made from it, you won't find it anywhere else.

The Fine Print: The above steps detailing the recabling of a headphone are for entertainment purposes only, and not to be performed under any circumstances. The owner of this blog and all associated parties can not / will not be held responsible if you attempt the process posted and cause physical harm to yourself, your surroundings or your property. Please keep this in mind.