High-end Custom Audiophile Headphone Cable for HiFiMan Susvaras

High-end Custom Audiophile Headphone Cable for HiFiMan Susvaras

If you are looking for high-end audiophile wire, ultra pure ohno cast copper, aka UP-OCC, should be on your shortlist. The copper is drawn from much larger crystals so it has a much smoother and cleaner appearance under a microscope versus standard oxygen free copper with a more grainy texture. See below: 

Thanks to it's long grain structure, UP-OCC is commonly used for higher-end audiophile cables. But what if we wanted something even better? Zynsonix now has access to ultra pure, ohno cast silver (UP-OCS) wire known for even better conductivity. 

For this post I'll be assembling a Zynsonix UP-OCS Centurian Octet headphone cable for the HiFiMan Susvaras, easily one of the best headphones on the market. The Susvara's are known to be very unsensitive so that's why the Octet formation is recommended to get the extra juice from your headphone amp or speaker amp to the headphones. 

At the start we will need to hand-braid the UP-OCS silver wire, this is a pair of litz quads which will be running in parallel. 

I like to give the cable a nice snug PTFE Teflon wrap to help reduce unwanted vibration and microphonics. 

Next comes the sleeving. We went with ViaBlue's patterned black, red and white patterned sleeving

The next step is to add the Zynsonix blind embossed leather tag and Y-splitter.

And we can terminate the cable with some Cardas Quadeutectic solder, 3.5mm connectors and a Furutech rhodium plated 4 pin XLR for balanced audio. 

This is an extremely high performing audio cable that does the HiFiMan Susvaras justice. It's also relatively light despite the extra conductors thanks to the hand-braided UP-OCS. If you'd like to hear the best your Susvaras can sound, please check out the Zynsonix Imperial Legate. It can be terminated in any balanced or single-ended rhodium connection including 4 pin XLR, dual 3 pin XLR, 6.3mm TRS, 4.4mm TRRRS, 3.5mm TRS, 2.5mm TRRS, bananas/spades, or SpeakON connector for Benchmark AHB2.

 

Emotiva BasX A-100 Stereo Flex Amplifier Review

This is a review of the headphone output of the Emotiva BasX A-100 Stereo Flex Amplifier. If you’re not familiar, Emotiva makes some great audio products at incredibly attractive price-points. They offer a host of speakers, headphones, amplifiers, processors, and other gear. I have owned their portable DACs which are a tremendous value; I ended up parting ways for lack of need. They were quite good sounding though and offered a robust build quality. I currently have some of their power equipment which is also well built. If I were a home theater afficionado, I’d likely have even more of their gear.

Emotiva has a value-oriented 2 channel amp called the BasX A-100. Normally it is a speaker amp providing 50 watts per channel into 8 Ohms and 80 Watts per channel into 4 Ohms, which is plenty for most setups. What is also pleasing for those with limited in-house real-estate is that the unit is half width, so 8-1/2” wide x 3.125” high x 15” deep. That saves half of your shelf for another piece of equipment/some headphones or something else.

Perhaps what is most interesting about the A-100 is that it can be used as a high-powered headphone amp. Granted, very few people would need this capability, but it is there. The unit does need to be internally jumpered for this operation as it is unsafe for standard headphones. The output is:

8 Ohms:  50 watts / channel
33 Ohms:  12 watts / channel
47 Ohms:  8.5 watts / channel
150 Ohms:  2.6 watts / channel
300 Ohms:  1.3 watts / channel
600 Ohms:  0.6 watts / channel

So, what headphone owners would be interested in this feature? Owners of low-sensitivity headphones like the HiFiMan Susvara, HiFiMan HE-6 or HE-6se, the HEDDPhones, the Abyss AB-1266, and others.

Normally I use an external box with some high quality resistors to convert a speaker amp’s output for headphones (it has some protections built in for amps with output transformers) but given the low cost of the A-100, it was a no-brainer to at least try it out.

Starting with the good news, the A-100 produced plenty of usable volume with the HE-6se and drove them with spades. There are some caveats though. The first, I noticed the amp takes a bit of time to warm up. When listening immediately, the midrange wasn’t well defined. After 10-15 minutes this seems to go away. Second, I found the sound to be fairly cool/bright and slightly lacking on the low end. This isn’t a big deal if you don’t mind EQing. I found reducing the upper midrange and increasing the low range to help make the sound more agreeable for my personal preferences. If you are listening from a computer, you can use the free program PEACE to make adjustments, if not, you can pick up something like the JDS Labs Subjective3 or the Schiit Loki. Neither of these offer an ideal level of control to get the A-100 exactly right (for me), but they are well made and get the job done affordably.

Running the HifiMan HE-6se with the Emotiva A-100

It seems that perhaps the weakest link of the A-100 is its potentiometer (volume control). Early into turning it, there was very noticeable channel imbalance. This seemed to subside quickly as the volume rose; however, it is important to note. A good potentiometer can be costly, so this was likely a price point issue. Given an Alps Blue Velvet (RK27), a frequently used entry-level potentiometer for audio, is around $12 per piece in bulk, it would be very hard to implement at this price level.

You get a lot for your money in terms of parts and build

Overall, the Emotiva BasX A-100 Stereo Flex Amplifier is impressive at its price point given the heft, solid and attractive build, and ability to send 50 WPC to a pair of headphones. Also the internal rectified power supply (no wall wart) is typically reserved for more expensive gear. If you were in the position to have purchased some HiFiMan HE-6 or HE-6se and had very little left over for a suitable amp, this is probably the only game in town, aside from potentially the balanced output of the Schiit Magnius which I haven’t yet tested.

If you were only interested in powering speakers and don’t mind purchasing used gear, you might want to cross-shop an older receiver from a reputable brand like Yamaha, Onkyo, Outlaw, or Denon. If you are DIY-minded, a chip amp like Akitika is a good route to investigate for speakers.   

If you are trying to power low-sensitivity headphones via a speaker amplifier, please check out the CBOX at Zynsonix.com. It provides a safe consistent load for your amplifier while delivering the juice your headphones need.